The direct application of traditional extrusion machine parts extrusion die casting process, can only use the clamping force, the clamping force is only a power forward.

In recent years, the development of copper extrusion parts in China has been developing rapidly, and the development trend is beyond the expectations of the industry. However, the direction of development is not clear. Although there is a sense of development, there are a lot of products, but there is no scale. When we take great efforts to develop, we must face up to the fact that, first of all, because we have concentrated on the secondary products for many years, our enterprises will have a big gap in their manufacturing capabilities and R & D capabilities. Of course, at present, the development of our industry is also unbalanced, uncoordinated and imperfect. The concentration of production is not enough, the scale is small, production distribution and all kinds of resources are not fully utilized, and the phenomenon of repeated investment and construction is still inevitable.

Therefore, the extrusion die casting process can only be used in the extrusion die casting process with the traditional extrusion machine parts, and only the clamping force is only a driving force. The size of the clamping force determines the size of the extrusion force. Therefore, the full hydraulic pressure type traditional extrusion machine fittings, its clamping force is its clamping force, can also be used as its extrusion and filling force. The forward extrusion force of the elbow elbow extruder is equal to the clamping force of the clamping cylinder by the lever ratio of the clamping mechanism, but it can not exceed the compression strength that the clamping mechanism can bear. Squeezing die casting is carried out with this equipment. Because the location of the clamping head does not reach the self locking point of the clamping mechanism, the extrusion end position is the point of its clamping resistance. If the same die casting ratio is applied, the projection area of the parts can be reduced.

In management, by establishing modern enterprise system and applying modern management methods extensively, we should strive to reduce intermediate links in product manufacturing process, reduce product cost and enhance product value, and make enterprises stronger and bigger through capital operation. On the development strategy of the enterprise, always keep a clear head, the advantages and disadvantages of its own analysis, the enemy, moderate expansion of product variety and scope of business operations, to avoid a single product business risk, improve the ability of domestic enterprises to withstand risks more than extrusion machine parts, in order to encourage enterprises to embark on a healthy and sustainable development of the road in an invincible position in market competition.

Extruder parts are the foundation, support and restriction bottleneck for the development of extrusion parts products. When extrusion parts develop to a certain stage, the research of high technology industry mainly focuses on key components such as engine, hydraulic, transmission and control technology. To master and rely on the key components of high quality and characteristic will become the strategic way for manufacturers to seek "one stand alone". Luo Baihui, a member of the association, said that enterprises in the industry should lead the formation of technical alliances to tackle key components in technology. However, the joint venture is not necessarily a key technology, and the foreign companies have given up to the Chinese side that the mechanical technology achievements that have been studied for many years are rare. Moreover, under a lot of technology has been monopolized, overseas enterprises will not import technology into China.