The domestic extrusion machine parts go on the road of healthy and continuous development

The extrusion die casting process is directly applied to the traditional extrusion machine parts. Only the clamping force is used, and only the clamping force is a driving force forward. The size of the clamping force determines the size of the extrusion force. Therefore, the full hydraulic pressure type traditional extrusion machine fittings, its clamping force is its clamping force, can also be used as its extrusion and filling force. The forward extrusion force of the elbow elbow extruder is equal to the clamping force of the clamping cylinder by the lever ratio of the clamping mechanism, but it can not exceed the compression strength that the clamping mechanism can bear. Squeezing die casting is carried out with this equipment. Because the location of the clamping head does not reach the self locking point of the clamping mechanism, the extrusion end position is the "point" of the clamping resistance. If the same die casting ratio is applied to the mold, the projection area of the parts can be reduced.

At present, China's development of extrusion machine parts industry is still in the primary stage, lack of standardization of the market, especially the lack of information to guide the exhaust gas adsorption unit and the overall transparency of the industry industry, plus sales channels, market demand information feedback is not timely, for the enterprise lack of enterprise communication with the host machine parts extrusion, resulting in long term since many products overcapacity, inventory backlog of cases. The waste of product resources, the occupation of effective funds lead to the difficulty of the capital turnover of enterprises, and the late R & D production can not be guaranteed. From the perspective of the development of the whole industry, it can be called the repeated investment of products. In our words, good steel is useless, so it will hinder the development and speed of the accessories industry.

The volume of domestic copper and aluminum extruder parts is constantly expanding, and the sales situation is exceptionally hot. Besides bringing excitement and surprise to the industry, we can not let some insight people feel a bit of concern. Any product are not likely to have been selling it, extremely hot after is likely to face the next stage of the market deserted and dull, and the cold conversion quickly often makes the market expectation; because it is the typical fund pulled products.

On the development strategy of the enterprise, always keep a clear head, the advantages and disadvantages of its own analysis, the enemy, moderate expansion of product variety and scope of business operations, to avoid a single product business risk, improve the ability of domestic copper aluminum extrusion machine parts enterprises against the above problems, in order to encourage enterprises to embark on a healthy and sustainable development. The road, in an invincible position in market competition.