Analysis of common problems in aluminum extrusion machine and aluminum extrusion machine

We all know that the quality of aluminum, its products must be used with high quality aluminum extrusion machine and auxiliary equipment production line, perfect manufacturing with each other out, but when you have a precise machine, but he didn't know, then everything is empty. Now, we have a brief description of the common problems on the aluminum extrusion machine.

Why does the power supply fail when starting an aluminum extrusion machine?

We will meet the power is disconnected in the use of aluminum extrusion machine, so don't worry, sometimes because of motor overload caused by the electric box, try to reset the contactor, the start button and check whether the power line fault, then check in normal motor or other electrical accessories.

Why does the aluminum extruder turn color when it runs normally?

When the aluminum profile extruder is running normally, the aluminum ingots will be oxidized to some extent due to the oxidation of oxygen on the surface of the high temperature aluminum ingot. This is a normal reaction, but the profiles will not fade.

What is the reason for the low pressure of aluminum extrusion machine?

The extrusion force is mainly affected by the deformation resistance, the processing rate, the billet length, the die angle, the extrusion speed, the friction condition and the temperature of the extrusion cylinder. First of all, determine whether the hydraulic pump is not the problem, if not, check the overflow valve, the pressure adjustment handwheel tightened. Hand over the overflow valve spool to see if there is pressure, the pressure needs to set 21Mpa.